• Home   
• IRS Guidelines   
• Value-Added Services   
• Savings Calculators   
• Market Applications   
• Downloads   
• FAQ's   
• Lighting Glossary   
• Resources   
• Contact   

• Visit The Rexel USA   
  Corporate Website   

"The information on this website is meant to provide a general overview of the tax provisions for the interim rules of lighting systems listed in the Energy Policy Act of 2005. In all cases the services of a professional tax accountant should be retained to determine the specific tax treatment appropriate for your company. Requirements for lighting levels and controls, in accordance with EPAct 2005, must also be satisfied for eligibility. Rexel will not, in any way, accept any liability for decisions made based on the contents of this preliminary explanation."

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

T12, T10, T8, T5
Industry standard naming for a fluorescent lamp. (T= Tubular and the numbers that follow represent the diameter in 1/8 inch increments.)

TCLP Test
Toxicity Characteristic Leaching Procedure - EPA test used to identify hazardous waste.

Total Harmonic Distortion (THD)
A measure of the distortion of the input current on alternating current (AC) power systems caused by higher order harmonics of the fundamental frequency (60Hz in North America). THD is expressed in percent and may refer to individual electrical loads (such as ballast) or a total electrical circuit or system in a building. ANSI C82.77 recommends THD not exceed 32% for individual commercial electronic ballasts, although some electrical utilities may require lower THDs on some systems. Excessive THDs on electrical systems can cause efficiency losses as well as overheating and deterioration of system components.

> Return to Top